Homepage Fa. Displaign

ADI99DVI

The ADI99DVI is fully downward compatible to the well-known ADI99, both concerning dimensions and plug positions and in the function range. The additional DVI input is new. TFT panels (TTL / LVDS) with resolutions up to 1280x1024 are supported. RGB-, DVI- (VGA / PC / Workstation) and video (camera / DVD) signals are proccessed.

RGB, DVI, 2xFBAS and Y/C may be connected at the same time. Both, manual and automatic input selection is selectable. In manual mode the input is fixed (ex. RGB) even if there is no signal. In automatic mode all inputs are scanned for a signal and the first found is displayed. A special feature is the scan sequence. Within the On-Screen-Manager can be defined which inputs are scanned in what sequence. The ADI99DVI has a jumper less design, controlled by the OSM only. It is activated by a JogDial ( intuitively control) or a four position keyboard with dynamic autorepeat.

Features:

Display:

all resolution from QVGA(320x200) to SXGA(1280x1024).
panel detection, automatic selection of panel power and timing.
no programming of panel files necessary. The firmware includes the timings of any ever adapted panel.
easy warehousing, one board fits to all panels
Frame Rate Converter. The panel is always driven with the specified timing, regardless of the input source.
high quality arbitrary scaling engine using (SmartScaling-2™) technology to fit the input image to panel resolution.
Dynamic Dithering makes a 18-Bit panel look like a true colour device.
LVDS interface for single and dual pixel panels
TTL interface for single and dual pixel panels

Inputs with selectable scan sequence:

RGB:
- 15-pin VGA connector and pin header 2,54mm²
- synchronization: H/V, C-Sync, SyncOnGreen
- Viewable Timing:
  - max. 1280x1024 (SXGA)
  - max. 200Hz vertical refreshrate
  - min. 15 MSPS
  - interlaced signals are supported
DVI:
- using DVI-I connector on additional adaptor board
Video:
- Video-Inputs: 4xFBAS (CVBS / Cinch) and 2xY/C (SVideo / miniDIN)
- Video-Norm: PAL, PAL60, SECAM, NTSC autodetect
- Motion Adaptive De-Interlace important for proper de-interlacing.
- Frequency-Locking to avoid image judder provoked by 50Hz -> 60Hz conversion

Global:

100% produced and engineered in-house not only the hardware but also any of the more than 62000 lines firmware source code.
Gamma Correction, fully adjustable and programmable through RS232, stored in EEPROM
180° image rotation selectable for TFT-viewing angle compensation
mirrored image selectable. (projektionssystems, rearview camera...)
OSM (On-Screen-Manager)
- User depandant functional range (user/technician/manufacturer)
- functional range depands on operation condition, ex. no video menu lines in RGB-mode.
- Signal independent OSM rotation.
- controlled by JogDial (for intuitively control) or
- four position keyboard with dynamic autorepeat (menu, up, down, select)
- Hotkey-Control: many functions are direct controllable without circuitous OSM action.
- user defined positioning of the OSM.
Freeze image (full frame memory)
Test images
Grafic Bootlogo
- The customer logo is displayed at power-up for a selected time or until the customer application software starts (hide system boot messages)
- The Logoupdate loads a image file (BMP 256-color) easy and comfortable.
Advanced RS232 Support
- All OSM functions are controllable in background, without opening the OSM .
- All of these commands may be written to a script file.
- block transmission with checksums for secure communication even in rough environment
- up to 16 ADI99DVI boards may be controlled by one PC port
- powerful windows tool for implementation of the DLE communication protocol in costumer systems
- Firmwareupdate through RS232 even on location possible
Single Supply 12V DC