Homepage Fa. Displaign

285P

The High End Graphics Card 285P represents the next step up from Displaign's well known ADI99DVI. It was especially developed for high resolution panels, HDTV and picture in picture display. TFT panels with a resolution of up to 1920x1440 pixel are supported.

Especially the provides an outstanding image quality when using HDTV(480i, 576i, 1080i). In addition to the color component inputs also / and further signal sources can be processed using additional optional input modules.

The 285P processes 2-channels at the same time, allowing Picture-in-Picture (PiP) and Picture-by-Picture (PbP) presentation. For example an RGB source may be overlayed by a HDTV input window with free size and position definition.

6 input signal sources (2xRGB/YPbPr, DVI, 2xFBAS and Y/C) are provided at the appropriate connectors and an additional pin header provides another 7 inputs.

In addition to the individual input selection, (even after a signal loss or power up) only the selected inputs are checked for a valid input signal; also an automatic channel search is possible. In this case all inputs are scanned for inut signals, and the first valid input is selected for display. The user can define on which inputs and in which order the card will search for a signal by using the On-Screen-Manager (OSM).

The 285P, like the ADI99DVI, does not use jumpers; all settings are selected by using the OSM, controlled by a Jogdial (optical or mechanical, allows for intuitive control), or a keyboard with dynamic auto repeat.

Compatibility to the ADI99DVI board is ensured by using the same cables. Data- and Inverter cables of the ADI99DVI can be re-used without modification.

Features:

Display Features:

1920x1440 pixels resolution
panel detection, automatic selection of panel power and timing.
no programming of panel files necessary. The firmware includes the timings of any ever adapted panel.
easy warehousing, one board fits to all panels
Frame Rate Converter. The panel is always driven with the specified timing, regardless of the input source.
4:3 <--> 16:9 Non Linear Scaling
High quality arbitrary scaling engine using Cubic-Level filters for scaling to fit the input image to required panel resolution
Stepless scaling, horizontal and vertically also from each other independently selectable
Dynamic Dithering makes a 18-Bit panel look like a true colour device.
LVDS-Output (1/2-Kanal; 24/48-Bit)
TTL-Output (1/2-Kanal; 24/48-Bit)

Inputs with selectable scan sequence:

2x RGB/YPrPb(HDTV):
- 15-pin VGA connector and pin header 2,54mm²
- synchronization: H/V, C-Sync, SyncOnGreen
- Viewable Timing:
  - max. 1920 x 1440 and all HDTV (480i,576i,720p,1080i,1080p)
  - max. 200Hzvertical refreshrate
  - min. 15 MSPS
  - interlaced signals are supported
DVI:
- DVI-I connector, you can use the analogue input of the DVI-I connector as the 2nd RGB/YPbPr channel
- Long Distance DVI - option (up to 50m, with high quality cable)
- Viewable Timing:
  - max. 1920 x 1200 and all HDTV (480i,576i,720p,1080i,1080p)
  - max. 200Hz vertical refreshrate
  - min. 15 MSPS
  - interlaced signals are supported
Video(SDTV):
- 10-Bit 4x oversampling
- CTI color transient improvement
- DNR digital noise reduction
- 5-line super adaptive 2D comb filters
- Video Inputs: 2xFBAS (CVBS / Cinch), 1xY/C (SVideo / miniDIN) and at pin header another 7 inputs (3xY/C or 11xFBAS)
- Video-Norm: PAL, SECAM, NTSC auto detect
- Frequency-Locking for true 50Hz video to avoid dropouts
Additional input modules
- HD-/ SD- SDI

Global:

100% produced and engineered in-house not only the hardware but also the firmware source code.
3^RD Generation Motion Adaptive De-Interlace in order to prevent half-image disalignment (slat fence effect) in fast motion.
programmable 10-Bit Gamma Correction, user definable and downloadable via RS232 (is saved in the EEPROM)
180° image rotation selectable for TFT-viewing angle compensation
mirrored image selectable. (projections systems, rear view camera...)
OSM (On-Screen-Manager)
- functional range depands on operation condition, ex. no video menu lines in RGB-mode.
- Signal independent OSM rotation.
- controlled by JogDial (for intuitively control) or
- four position keyboard with dynamic autorepeat (menu, up, down, select)
- Hotkey-Control: many functions are direct controllable without circuitous OSM action.
- user defined positioning of the OSM.
Freeze image (full frame memory)
Test images
Grafic Bootlogo
- Boot logo creation simply by freezing a Screen dump. The input image will be stored to Flash memory
- The customer logo is displayed at power-up for a selected time or until the customer application software starts (hides system boot messages)
Advanced RS232 Support:
- All OSM functions are controllable in the background, without opening the OSM
- All of these commands may be written to a script file.
- block transmission with checksums for secure communication even in rough environment
- up to 250 285P boards may be controlled by one PC port
- powerful windows tool for implementation of the DLE communication protocol in costumer systems
- Firmwareupdate through RS232 even on location possible
Single Supply 8-28V
OnBoard regulation for 3,3V/5V/12V panel supply voltage